Question 1

What quantity of gravel do I need?

Accepted Answer

For a 2-inch layer, one ton of gravel covers approximately 100 square feet. Driveways generally need 4 to 6 inches of depth. The total needed will vary with the area and planned depth. Use our free gravel calculator for a more precise estimate: enter your project's length, width, and depth to find the tons required.

Question 2

How much material may I order?

Accepted Answer

Orders can range from one ton for a small patio or garden path to multi-ton loads for construction work and driveways. Roughly 100 square feet can be covered by one ton of gravel installed 2-inch deep. If the required amount is unclear, try the gravel calculator or use our contact form for assistance with the estimate.

Question 3

How will my gravel arrive?

Accepted Answer

Bulk material is brought to your property by dump truck. Identify an accessible placement area, such as a driveway or yard, and the driver will leave the load there. The truck reverses into the designated spot, raises its bed, and deposits the aggregate in a pile. Smaller areas can be spread with a shovel or rake; a skid steer can be used for larger areas.

Question 4

Must I be home when the material arrives?

Accepted Answer

You can usually receive a delivery without being present. Before the delivery date, mark the intended drop area with cones, flags, or stakes so the placement is clear. If access is blocked or the driver cannot determine where to unload, they may call you. Include any access limitations or placement directions with your order so the driver receives them.

Question 5

When will delivery take place?

Accepted Answer

Delivery timing depends on product availability and your location, with most orders arriving as fast as 2 business days. Locations near metro areas or major supplier hubs may receive orders sooner, while rural or remote addresses can take slightly longer. Once the order is placed, you will receive an email confirmation showing an estimated delivery window. For materials needed by a certain date, contact us before ordering.

Question 6

Which gravel works well for driveways?

Accepted Answer

For a driveway, use crushed stone or crusher run, also called dense grade aggregate. The angular, textured particles compact and interlock to create a firm surface for vehicle traffic, which is useful through Maine freeze-thaw conditions. Common driveway choices are 3/4-inch crushed stone and 1/2-inch crusher run. Do not use smooth, rounded material such as pea gravel for a driveway, since it shifts under tires and compacts less effectively. See our product catalog for options in your area.

Question 7

How do pea gravel and crushed stone differ?

Accepted Answer

Pea gravel is made up of smooth, naturally rounded stones, usually 1/4 to 1/2 inch across. Its comfortable surface and appearance suit garden beds, walkways, dog runs, and decorative landscape areas. Crushed stone is made by breaking larger rock, leaving angular edges. It compacts and locks together, so it is more appropriate for foundations, drainage, driveways, and structural work. Choose crushed stone where the material needs to stay put and carry weight. Pea gravel is suited to decorative locations and areas with lighter traffic.

Question 8

Is delivery available in my area?

Accepted Answer

Maine delivery coverage includes metro areas, suburbs, and many rural locations. Enter the delivery address at checkout to confirm whether service is available there. For a particularly remote location, use our contact form to check availability.

Question 9

What happens if I buy too much or too little gravel?

Accepted Answer

Any material beyond what you need remains at the property, since excess aggregate cannot be collected after delivery. Leftover gravel can be used to fill low areas, edge garden beds, or refresh walkways. If the quantity is short, place another order for a second delivery. Check the gravel calculator before ordering to help avoid either result. Allowing about 10% above the calculated quantity accounts for changes in grade and compaction.

Question 10

May I combine products in one order?

Accepted Answer

Each order currently covers one product type. Materials travel from the supplier by dump truck, so combining products during transit is not feasible. For multiple materials, such as crushed stone for a driveway base and pea gravel for a walkway, place separate orders.

Question 11

How are prices set?

Accepted Answer

Material type, order quantity, and delivery address determine pricing, which may differ by region. Every price shown on our website includes free delivery, so the displayed amount is the amount due at checkout.

Question 12

Which payment methods can I use?

Accepted Answer

Visa, Mastercard, American Express, and Discover are accepted for online orders, along with other major credit and debit cards. Payment is securely processed through our encrypted checkout system. Cash, checks, and purchase orders are not accepted for online orders. For special payment needs on a large commercial order, contact us through our contact form to discuss options.

Question 13

What is the refund policy?

Accepted Answer

Before an order is dispatched for delivery, it can be canceled and fully refunded. After material has been loaded for delivery or delivered to your property, refunds are generally unavailable because bulk aggregates cannot be returned. If the order includes incorrect material or a significant shortage, contact us promptly through our contact form. See the refund policy page for full details.

Question 14

How can I estimate gravel for my project?

Accepted Answer

Start by measuring the area's length, width, and desired depth. Multiply those measurements to determine the volume in cubic feet, then divide by 27 to convert it to cubic yards. A cubic yard of gravel weighs approximately 1.4 tons, so multiply the cubic-yard total by 1.4 to find the tonnage. You can also use our free gravel calculator rather than calculate it manually. Enter the measurements to see the required tons and cost.

Question 15

Which gravel sizes are available?

Accepted Answer

Stone size is generally identified by the diameter of its pieces. Typical options are 1/4-inch (pea gravel), 1/2-inch, 3/4-inch, 1-inch, 1-1/2 inch, and 2-inch stone. Pea gravel and other smaller material are commonly used for patios, walkways, and decorative work. For parking areas, driveways, and general landscape work, 3/4-inch crushed stone is a common choice. Material in 1-1/2 inch and 2-inch stone sizes is often used in French drains, erosion control, and drainage applications. See the product page for sizes and material types available for delivery near you.

Common Questions

Need More Information?