Skip to main content
FREE Delivery!|Get a quote

Landscaping material calculators for Maine

Start with your measurements to order the right amount. Estimate here first, then use the calculator for your selected material to find depth guidance, coverage information, and examples.

Free delivery on every orderacross Maine served✓ Delivery in as fast as 2 business days

Add your project measurements

ft
Enter a length greater than 0
ft
Enter a width greater than 0
ft
Enter a diameter greater than 0
in
Enter a depth between 0.25 and 24 inches
Add 5% extra for compaction & spillage

One cubic yard measures 3 x 3 x 3 feet. Bulk materials are sold by that cube or by the ton, so ordering starts with turning the area of your project into one of those measures. These tools make that conversion for 24 materials we carry, using each material's actual cubic-yard weight. Shredded mulch is about 600 lb per yard. Crusher run is about 3,000 lb per yard. The volume is identical, but the latter weighs five times as much. That difference is why a general aggregate calculator can miss the tonnage while a material-based calculator accounts for it.

Pick a material

Calculation method

Calculate volume from the footprint and depth. First multiply the length and width, both in feet. Convert the depth to feet by dividing inches by 12, then multiply to get cubic feet. Divide that result by 27 to find cubic yards. Apply the material density to the yardage for tons. The calculation works the same when measurements are provided by phone.

Cubic yards = (Length ft × Width ft × Depth in ÷ 12) ÷ 27
Tons = cubic yards × density (0.3 for mulch, up to 1.55 for riprap)

Depth can make or break an estimate. It is easy to measure the area and then make a rough depth guess. Yet a 10 x 10 patio at 2 inches takes half as much stone as that patio at 4 inches. Check the material page for depths suited to its intended uses when you need direction.

See all 24 materials

The calculators use the figures in this chart. Use it to compare materials or review a quote from a different yard:

MaterialWeight per yd³Tons per yd³Typical depth1 yd³ covers at 3"Sold by
Driveway / walkway gravel≈ 2,800 lb1.402–4" (6" new drive)108 sq ftTon
Pea gravel (3/8")≈ 2,800 lb1.402–3"108 sq ftTon
Crushed stone #57 / 3/4"≈ 2,800 lb1.402–4"108 sq ftTon
Crusher run / road base≈ 3,000 lb1.504" compacted108 sq ftTon
River rock (1–3")≈ 2,700 lb1.352–4" by size108 sq ftTon
Mason / washed sand≈ 2,700 lb1.351–6" by use108 sq ftTon
Topsoil (screened)≈ 2,200 lb1.102–6"108 sq ftYard
Garden soil (blended)≈ 2,000 lb1.004–12" by bed108 sq ftYard
Fill dirt≈ 2,400 lb1.20as needed108 sq ftYard
Shredded mulch≈ 600 lb0.302–3"108 sq ftYard
RipRap / armor stone≈ 3,100 lb1.5512"+ layersn/aTon

Match material to the project

  • For a new driveway or parking pad, figure the crusher run or road base below separately from the driveway gravel or #57 stone above. Use one calculator for each layer.
  • For pooled water, a wet trench, or a French drain, allow clean #57 or drain rock at 12 inches or deeper.
  • In planting beds, place shredded mulch around plants. Choose river rock for a border that does not need refreshing.
  • For a bare or sparse lawn, spread screened topsoil 4 to 6 inches deep before seed or sod.
  • Use fill dirt to build up grade or fill a hole. Keep topsoil for the final 4 to 6 inches at the surface.
  • Build a paver patio with compacted base and a 1 inch bedding-sand layer. The Paver Base and Paver Sand calculators calculate the layers separately.
  • For playground fall zones, maintain pea gravel at 9 to 12 inches deep.
  • Place riprap over fabric in layers of 12 inches or more to address an eroding bank or shoreline.

Move from estimate to driveway delivery

The materials listed above are Maine Rock Supply products. All orders across Maine include free delivery, often within 2 business days. Calculate the quantity, follow the calculator link to its product page, and check out. You can also send your measurements through our contact form and get help with the math.

Common ordering questions

What calculator is right for my project?
Use the calculator for the material you plan to buy because it uses that material's actual weight. Considering pea gravel and river rock for one path? Enter the same measurements in both. The cubic-yard amount remains unchanged, but the tons and price differ.
Do I buy by cubic yard or by ton?
Use the unit shown on that product page. Gravel and stone are priced by the ton, while mulch and soils are priced by the yard. Each calculator displays both amounts, so you do not need to convert units yourself.
What level of accuracy can I expect?
The formula is exact, but site conditions can differ. Moisture, compaction, and uneven subgrade can change the amount needed by roughly 10 to 15%, so results include a range and crushed materials start with a small extra allowance. Check your measurements twice to stay in that range.
Can a single delivery contain multiple materials?
Yes. Calculate each material separately, such as base stone with surface gravel, fill dirt with topsoil, or mulch with edging rock. Add them all to one order. Delivery remains free.
Are the calculator materials all available for purchase?
Yes, all 24 materials are available. Every result takes you to the corresponding product page with the quantity from your calculation.

Get free delivery after you calculate

The 24 materials shown in these calculators are delivered free across Maine.

Shop all products